![]() It also has a flip-switch to alternate between single and sequential firing. The minimum amount of nails that can be loaded is five at a time. The anodized aluminum magazine is replaceable and holds up to 64 nails, or two strips. ![]() Note that the nail magazines are specifically angled at 21 degrees-no other angles will work. It accepts longer and thicker nails, up to 3-1/2 inches long and. No more need to go back to the compressor to adjust pressure to countersink a nail. It has some new features that the NR83A3(S) lacks.įor example, the NR90AEPR has a depth adjustment dial right by the trigger. Hitachi’s NR90AEPR is quickly becoming another legend. Box includes safety glasses Hitachi NR90AEPR 3-1/2” Plastic Collated Full-Head Framing Nailer More flexibility and control.Accepts full round head nails from 2 to 3-1/4-inches long.Hitachi recommends their own product which is not included in the box. Of course, like most pneumatic nailers, this one has to be lubricated. The rubber non-slip grip makes it easy to hold. ![]() The nailer measures 21-13/16 x 4-1/4 x 13-3/8 inches and weighs 8.6 pounds. If there is a jam, the nose opens to clear it quickly. Hitachi warns of the risk of recoil causing double-fires in sequential mode if the nose makes contact a second time. The nailer has a flip-switch near the trigger that changes it from single-fire to sequential shots. The lack of an on-board depth adjuster is a con for new builders who may have to waste nails and time determining the correct pressure to sink nails to a desired depth. The nailer has a 3/8-inch air inlet for a hose. Hitachi recommends 70 to a maximum of 120psi. The nailer only accepts magazines of nails with a 21-degree angle.ĭepth adjustment, or how deep the nails sink into the material, is done at the air compressor. ![]() The magazine holds two clips at a time, which is 64 to 70 nails. The nailer accepts up to 3-1/4-inch-long full round head nails ranging in diameter from. It has a two-piece steel magazine that can be replaced individually in case it is damaged. The NR83A3(S) has been used by professional framers for years and has proven to be a durable tool. Hitachi NR83A3(S) 2 Inch to 3-1/4” Plastic Collated Full Round Head Framing Nailer Old Reliable ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |